The highest quality backyard putting green material available on the market today...

Professional installers appreciate ATPG Nylon Putting Green Technology

Our 1/2" nylon product comes with a commercial grade 3 ply rubberized action backing (It's not a typical unitary scrim back).

ATPG latest true bentgrass non brittle soft nylon fibers.

Our soft nylon fiber allows a truer ball impact when chipping onto your new nylon practice putting green.

This new technology is the only 9.5 to 12 adjustable stimp speed on the market for nylon putting greens.

Our New Putting Green Technology revolutionized the old polypropylene fibers. Giving you the most realistic putting green surface on the market today. This technology reduces putting green installation time, and the old difficulties by better then half.

 

Pre-Bent Fibers - We start with an approximate 5/8" - 11/4" fiber and then we reduce it (pre-bend) to a 9/16" - 5/8" finished height by means of our new manufacturing process. This ensures you that the end results will be an actual well dressed putting green surface that does not require a seasoned installer.

Non-Directional Fibers will never lean one direction like the old technology. The leaning of the fibers in one direction will cause a huge speed difference depending on if you are putting against the grain, or with the grain. In the past, it has taken a tremendous amount of effort (labor and know-how) to eliminate this problem when using the old polypropylene straight fiber putting green material.

 

A Big Part Of This New Technology is how the yarn is stitched. Old technology uses a straight or curvy stitch. We use the new high tech machinery that weaves in a back and forth pattern, which eliminates the possibility of grooves (highs and lows) in the putting green surface.

Sample Instructions: Putting Green Installation		After rough cutting the fringe material, put it in place and  nailing down the outer edge (use galvanized 6" or 7" gutter spike). Lift up the putting green surface and place the fringe pieces under the putting green surface. Now you can use the putting green edge as a template to cut your fringe.  NOTE: Cut along the edge with a good sharp utility knife... Full instruction info. available to customers, as well as phone support.